Shop All

PROFIBUS-Interface for zone 1/21 8 x 4 to 20 mA in Ex i In the Ex i version, the MODEX 8 x 4 to 20 mA module with 8 analogue inputs enables 8 analogue intrinsically safe signals to be fed in or...

– Certified in combination with TC7x Series– Holder for stylus

Pressure Transducer for Reid Vapor Pressure Analyzer Analyzer RVP Dimensions (inches) 6 x 3 x 1 Weight (lb.) 0.5

Diode suppressor circuits for electrical and electronic control systems. Spark suppression diodes to prevent overvoltage in inductive loads such as solenoid valves, DC relays, DC valves etc...

Platinum Service Contract for BCS36x8-IS Barcode Scanner 3 year term Per Service Contract US-0119-BCS36 Rev A

BARTEC Freeze Protection Ambient Sensing Panels provide power to heat trace circuits when ambient temperature drops below temperature setpoint on local ambient sensing RTD. BARTEC offers a variety...

Connection between HMI and handheld scanner BCS3608ex-NI, with open cable ends. USB; 1.9 m; plain USB; 4.5 m; plain Requirements are: USB interface must provide 5V/500mA on output side.  If...

PROFIBUS-Interface for zone 1/21 In the Ex i or Ex e version, the MODEX 8 x 4 to 20 mA module can control various actuators depending on the model using 8 analogue short-circuit proof outputs. The...

A freewheeling diode is used as a suppressor circuit. This module can be installed in series or in parallel to an electrical circuit as with a rail-mounted terminal. There are two connection...

Above insulation end seal kit with integrated red LED indication light. Features Class 1 Division 2 Hazardous Area RatingStand size allows up to 4 in of thermal insulationOn and Off-Pipe (Tank...

BARTEC DTW-1A and DTW-1L Temperature switches are ideal for freeze protection or temperature control in hazardous locations. DTW-1L series thermostats feature 10-foot stainless steel sensors for...

In the Ex e version, the MODEX 8 relay out module can activate various actuators using 8 outputs. It is possible, for example, to directly activate encapsulated solenoid valves, indicator lamps or...

Bartec-FEAM series PAP series cable glands for armored cable. Available in Non-Barrier, Barrier, and Deluge versions.  Designed for use in hazardous/explosive atmospheres Zone 1 / 2 (Gases) + Zone...

Power supply with DC connecting cable for 4-slot Ethernet base station Input voltage: AC 100 V to 240 V Output power: DC 12 V/9 A/108 W Further required: Country specific AC cable (

Power connection kit for up to two electric heat trace heaters with power and end termination kit included for one cable. Options offered include larger terminal blocks to fit up to #6 AWG power...

In the Ex i version, the MODEX 8 relay out module can activate various actuators using 8 outputs. It is possible, for example, to directly activate intrinsically safe solenoid valves or other...

Certified in combination with TC7x series– Simple assembly and disassembly without tools– Camera and expansion interface remain usable– Hand strap can remain on the device– Holder for stylus–...

BARTEC BMC-1A and BMC-1L Temperature switches are ideal for freeze protection or temperature control in non-hazardous locations. BMC-1L series thermostats feature 10-foot stainless steel sensors...

2-slot battery charging station suitable with Agile, Agile S and Agile S NI For charging of 2 batteries Input voltage: DC 10 V to 20 V (50 W) Charge indicator by LED and buzzer 2 plugged charging...

RVP Cell O-Ring, Kalrez Analyzer Reid Vapor Pressure Dimensions (inches) 8 x 1 x 1 Weight (lb.) 0.5

Agile S-NI Radio Module 4G/LTE Region Specific Support: LTE / DC-HSPA+ / HSPA+ / HSPA / UMTS (WCDMA)

–Input voltage: AC 76-240 V / 50-60Hz–Output voltage: DC 24 V / 1.5 A

ComEx Control station, 1-gang for Zone 1 & 2. Red Pilot Light   Ambient Temp -55/+60°C Type label Ex-marking

Power limiting heating cable (aluminum jacketed) used in hazardous and ordinary areas for freeze protection and process temperature maintenance applications for piping and equipment requiring high...

Power connection kit for up to three electric heat trace heaters with power and end termination kit included for three cables. Options offered include larger terminal blocks to fit up to #6 AWG...

Electric heat trace warning labels are to be placed every 10-20 ft on the outside of the thermal cladding of electrically traced pipe and on all sides of electrically traced equipment. Electric...

Leather holster for handheld scanner BCS3600ex Series Robust industry quality leather For attachment to belt or wall Color: Black

4-slot battery charging station for hand-held scanner BCS3678ex Series. Input voltage 12V DC (50W) Charge indicator by LED and sound Options For Div 1 & Z1/21 Battery (type 17-A1Z0-0012) use...

BARTEC-FEAM series PNAF series single compression cable glands for unarmored cable. Only with gland nut female thread suitable for flexible conduit coupling. Available in Non-Barrier and Barrier...

PROFIBUS-Interface for zone 1/21 In the Ex i version, the MODEX Ex i digital in module with 16 digital inputs enables 16 binary signals to be evaluated. For example, NAMUR sensors, optocouplers,...

Description Connecting HMI limiting cable (with open cable ends) to HMI (e.g. Polaris)

In the Ex-e version, the MODEX digital in module with 16 digital inputs enables 16 binary signals to be fed in. For example, pressure-resistant limit switches or control devices can be imported as...

Self-regulating heating cable used in hazardous and ordinary areas for freeze protection and process temperature maintenance applications for piping and equipment. Up to 250⁰ F maximum continuous...

Connection between base station and PC with terminal for 12 V power supply For use outside potentially explosive atmospheres!

In the Ex e version, the MODEX digital out module can control various actuators using 16 digital outputs. During operation, a channel can be short-circuited on the short-circuit proof outputs...

The optical fibre bushing is used as an optical fibre cable entry into flameproof enclosures located in hazardous areas. They can also be supplied with plug-in connectors. The optical waveguiders -...