Shop All

PROFIBUS-Interface for zone 1/21 8 x 4 to 20 mA in Ex i In the Ex i version, the MODEX 8 x 4 to 20 mA module with 8 analogue inputs enables 8 analogue intrinsically safe signals to be fed in or evaluated. For example, intrinsically safe two-wire...

– Certified in combination with TC7x Series– Holder for stylus

Pressure Transducer for Reid Vapor Pressure Analyzer Analyzer RVP Dimensions (inches) 6 x 3 x 1 Weight (lb.) 0.5

Diode suppressor circuits for electrical and electronic control systems. Spark suppression diodes to prevent overvoltage in inductive loads such as solenoid valves, DC relays, DC valves etc. Explosion ProtectionMarking ATEX II 2G Ex db e IIC GbII M2 Ex...

Platinum Service Contract for BCS36x8-IS Barcode Scanner 3 year term Per Service Contract US-0119-BCS36 Rev A

BARTEC Freeze Protection Ambient Sensing Panels provide power to heat trace circuits when ambient temperature drops below temperature setpoint on local ambient sensing RTD. BARTEC offers a variety of customizable features for these Freeze Protection...

Connection between HMI and handheld scanner BCS3608ex-NI, with open cable ends. USB; 1.9 m; plain USB; 4.5 m; plain Requirements are: USB interface must provide 5V/500mA on output side.  If these values are not supplied by the existing...

PROFIBUS-Interface for zone 1/21 In the Ex i or Ex e version, the MODEX 8 x 4 to 20 mA module can control various actuators depending on the model using 8 analogue short-circuit proof outputs. The controlled actuators can be switched off by an emergency...

A freewheeling diode is used as a suppressor circuit. This module can be installed in series or in parallel to an electrical circuit as with a rail-mounted terminal. There are two connection terminals on either side to facilitate wiring to other MODEX...

Above insulation end seal kit with integrated red LED indication light. Features Class 1 Division 2 Hazardous Area RatingStand size allows up to 4 in of thermal insulationOn and Off-Pipe (Tank wall) mounts availableEnd termination seal kits included...

BARTEC DTW-1A and DTW-1L Temperature switches are ideal for freeze protection or temperature control in hazardous locations. DTW-1L series thermostats feature 10-foot stainless steel sensors for remote monitoring and DTW-1A thermostats feature local...

In the Ex e version, the MODEX 8 relay out module can activate various actuators using 8 outputs. It is possible, for example, to directly activate encapsulated solenoid valves, indicator lamps or other certified consumers up to 6 A. The module is...

Bartec-FEAM series PAP series cable glands for armored cable. Available in Non-Barrier, Barrier, and Deluge versions.  Designed for use in hazardous/explosive atmospheres Zone 1 / 2 (Gases) + Zone 21 / 22 (Dust) Approved for Flameproof Ex d &...

Power supply with DC connecting cable for 4-slot Ethernet base station Input voltage: AC 100 V to 240 V Output power: DC 12 V/9 A/108 W Further required: Country specific AC cable (G7-A0Z0-0024/26/27)              ...

Power connection kit for up to two electric heat trace heaters with power and end termination kit included for one cable. Options offered include larger terminal blocks to fit up to #6 AWG power wire. Features Class 1 Division 2 Hazardous Area...

In the Ex i version, the MODEX 8 relay out module can activate various actuators using 8 outputs. It is possible, for example, to directly activate intrinsically safe solenoid valves or other intrinsically safe circuits. The module is connected to the...

Certified in combination with TC7x series– Simple assembly and disassembly without tools– Camera and expansion interface remain usable– Hand strap can remain on the device– Holder for stylus– Charging in with the USB adaptor cable with mounted scan...

BARTEC BMC-1A and BMC-1L Temperature switches are ideal for freeze protection or temperature control in non-hazardous locations. BMC-1L series thermostats feature 10-foot stainless steel sensors for remote monitoring and BMC-1A thermostats feature...

2-slot battery charging station suitable with Agile, Agile S and Agile S NI For charging of 2 batteries Input voltage: DC 10 V to 20 V (50 W) Charge indicator by LED and buzzer 2 plugged charging stations can be supplied with one power supply Scope...

RVP Cell O-Ring, Kalrez Analyzer Reid Vapor Pressure Dimensions (inches) 8 x 1 x 1 Weight (lb.) 0.5

Agile S-NI Radio Module 4G/LTE Region Specific Support: LTE / DC-HSPA+ / HSPA+ / HSPA / UMTS (WCDMA)

–Input voltage: AC 76-240 V / 50-60Hz–Output voltage: DC 24 V / 1.5 A

ComEx Control station, 1-gang for Zone 1 & 2. Red Pilot Light   Ambient Temp -55/+60°C Type label Ex-marking ATEX/ IECEx / UL Position 1 1x Pilot Light, Red, Entry Cable gland M20 side B To view Data Sheets, Technical Information, CAD...

Power limiting heating cable (aluminum jacketed) used in hazardous and ordinary areas for freeze protection and process temperature maintenance applications for piping and equipment requiring high power output or high exposure temperatures of up to 797...

Power connection kit for up to three electric heat trace heaters with power and end termination kit included for three cables. Options offered include larger terminal blocks to fit up to #6 AWG power wire. Features Class 1 Division 2 Hazardous Area...

Electric heat trace warning labels are to be placed every 10-20 ft on the outside of the thermal cladding of electrically traced pipe and on all sides of electrically traced equipment. Electric heat trace warning labels are to be clearly visible. This...

Leather holster for handheld scanner BCS3600ex Series Robust industry quality leather For attachment to belt or wall Color: Black

4-slot battery charging station for hand-held scanner BCS3678ex Series. Input voltage 12V DC (50W) Charge indicator by LED and sound Options For Div 1 & Z1/21 Battery (type 17-A1Z0-0012) use only the corresponding charger (17-A1Z0-0013) For Div...

BARTEC-FEAM series PNAF series single compression cable glands for unarmored cable. Only with gland nut female thread suitable for flexible conduit coupling. Available in Non-Barrier and Barrier versions.  Designed for use in hazardous/explosive...

PROFIBUS-Interface for zone 1/21 In the Ex i version, the MODEX Ex i digital in module with 16 digital inputs enables 16 binary signals to be evaluated. For example, NAMUR sensors, optocouplers, mechanical contacts or other actuating elements can be...

Description Connecting HMI limiting cable (with open cable ends) to HMI (e.g. Polaris)

In the Ex-e version, the MODEX digital in module with 16 digital inputs enables 16 binary signals to be fed in. For example, pressure-resistant limit switches or control devices can be imported as signals. The module is connected to the process control...

Self-regulating heating cable used in hazardous and ordinary areas for freeze protection and process temperature maintenance applications for piping and equipment. Up to 250⁰ F maximum continuous operating temperature (energized) and up to 374⁰ F...

Connection between base station and PC with terminal for 12 V power supply For use outside potentially explosive atmospheres!

In the Ex e version, the MODEX digital out module can control various actuators using 16 digital outputs. During operation, a channel can be short-circuited on the short-circuit proof outputs (short-circuit proof to a limited extent). For example,...

The optical fibre bushing is used as an optical fibre cable entry into flameproof enclosures located in hazardous areas. They can also be supplied with plug-in connectors. The optical waveguiders - also known as fibres - are made of glass and resist to...