Abtech-High Voltage Junction Box for Hazardous Areas-11V,980A-HVJB1253RH

The HVJB range provides a safe means of terminating 11kV power or combined multi-use cables within hazardous areas both onshore and offshore. It is certified for both Gas and Dust hazards.

The HVJB range builds upon the proven SX stainless steel enclosure platform to provide a safe and flexible method of high voltage power termination and distribution. This provides the designers of electrical infrastructure with a greater choice of cables, configuration and termination.

The range can accept up to four phase connections, and up to three connections per phase. These can be done as either bottom entry or a straight-through configuration.

Features:

• Fault rated 45kA for 0.2 second
• DTS-01 deluge tested enclosure
• Suitable for low temperature applications
• Heavy duty machined hinges with lift off cover pad-lockable cover

Specifications:

• Enclosure Type: High Voltage
• Ingress Protection: IP66/6 to EN60529, Type 4X, DTS-01
• Impact Resistance: >7Nm
• Material: 2mm 316L (EN 1.4404) Stainless Steel enclosure, silicone gasket and captive 316 stainless steel fasteners, 3mm 316L (EN 1.4404) Stainless Steel gland plates
• Ambient Temp Rating: -20°C to +40°C or -50°C to +55°C (refer to certificate)
• Maximum Terminations: 3 conductors per phase in & 3 conductors per phase out
• Number of Glands Plates: Dependent upon configuration
• Crimp Lugs: 6mm to 1000mm
• Earthing: Via studs on enclosure, door and gland plates
• Mounting: Via 3mm thick external mounting straps, slotted upper strap for ease of installation
• Area Classification: Zone 1 & 21, Gas and Dust / Class 1 Div 2
• Type of Protection: Ex eb (Increased Safety), Ex tb (Dust Protected)
• Apparatus Coding: Ex eb IIC T4 Gb, Ex tb IIIC T70°C Db / Ex eb IIC T150°C Gb, Ex tb IIIC T110°C Db
• Certificate Number: CML 16ATEX3324 & IECEx CML16.0100 / EAC: TC RU C-GB.MH04.B.00286

Specifications